Configuring Gatekeeper Settings - RADVision scopia xt5000 series Administrator's Manual

Configuring Gatekeeper Settings

About this task
A gatekeeper routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP
address of an endpoint, and handles the initial connection of calls. If your Scopia XT Series works in
conjunction with a gatekeeper, configure gatekeeper-related settings as described in this procedure.
This procedure completes the basic system configuration.
If you are modifying these settings after initial setup, navigate to Configure > Network > H.323 from the
Main menu. For more information, see
96.
Before you begin
This procedure is performed as part of the basic configuration after
page 59. Consult with your network administrator to configure these fields.
Access the quick setup wizard from the endpoint or web interface, as described in
Setup Procedure
Procedure
1. Set the Use Gatekeeper list to Yes.
2. Set the Mode list to Manual.
Administrator Guide for Scopia XT5000 Series Version 3.2
Registering the Scopia XT Series with a Gatekeeper
on page 54.
Figure 31: Gatekeeper settings
on page
Configuring Network Settings
Accessing the Quick
Initial Configuration | 61
on