Setting The User Pin Code For The Scopia Xt Series Endpoint - RADVision scopia xt5000 series Administrator's Manual

2. Enter the current PIN code required to access the Advanced settings in the Old PIN Code
3. Enter your new 4 digit PIN code.
4. Save your changes as follows:
Setting the User PIN Code for the Scopia XT Series
Endpoint
About this task
You can set a PIN code to access basic settings, such as the language displayed on the interface. If set,
you are required to enter this code before viewing or modifying any basic settings. You can do this
procedure from the endpoint itself or from the XT Series web interface.
By default, you do not need to enter any PIN to access and modify basic settings.
You can also modify the administrator PIN code, required to access and modify advanced settings, such
as defining camera settings or enabling SNMP management. To modify the web username and
password for the Scopia XT Series, see
Series Web Interface
Administrator Guide for Scopia XT5000 Series Version 3.2
• From the endpoint's main menu, select Configure > Advanced > Utilities > PIN
Protect Settings > Advanced Settings > Choose a new PIN Code.
You need to enter the PIN required to access the Advanced settings. The default PIN
is 1234.
• From the XT Series web interface, select Administrator Settings > Utilities > PIN
Protect Settings > Administrator.
Figure 71: Modifying the administrator PIN
field. The default PIN is 1234.
From the web interface only, re-enter your new PIN in the Confirm PIN Code field.
• From the endpoint, select Done.
• From the web interface, select Save.
Use this PIN the next time you are accessing advanced settings.
on page 125.
Modifying the Username and Password for the Scopia XT
Maintaining the Scopia XT Series | 124