Configuring The Screen Saver To Start Automatically - RADVision scopia xt5000 series Administrator's Manual

Configuring the Screen Saver to Start Automatically

About this task
The screen saver helps to protect your monitor from burn-in without switching it off. This can be useful in
situations when you stop using your Scopia XT Series for a relatively short period of time. You can do
this procedure from the endpoint itself or from the XT Series web interface.
Procedure
1. Access the screen saver settings as follows:
2. Select Yes from the Screen Saver list.
3. Set the time after which the screen saver automatically starts on the display in the Minutes
4. From the web interface only, select Save.
Administrator Guide for Scopia XT5000 Series Version 3.2
• From the endpoint's main menu, select Configure > General.
• From the XT Series web interface, select the Basic Settings tab.
Figure 37: Configuring screen saver settings
field.
Initial Configuration | 70