Setting Date And Time - RADVision scopia xt5000 series Administrator's Manual

Setting Date and Time

About this task
You can set the date and time from either the endpoint or the web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
Procedure
1. Access the date and time settings as follows:
2. Set the date and time, as described in
Administrator Guide for Scopia XT5000 Series Version 3.2
• From the XT Series web interface, select Administrator Settings > System > Date &
Time > General.
• From the endpoint's main menu, select Configure > Advanced > System > Date &
Time > General.
You need to enter the PIN required to access the Advanced settings. The default PIN
is 1234.
66.
Important:
If you configure set Internet time to Yes , you cannot modify the date and time fields.
Table 14: Configuring date and time settings
Field Name
Day Enter the date.
Month Enter the month.
Year Enter the year.
Hour Enter the hour.
Minutes Enter the minutes.
Internet time Select Yes to synchronize the system clock with the network clock,
thus allowing you to align devices connected to the Internet using
NTP.
on page 44.
Table 14: Configuring date and time settings
Description
on page
Initial Configuration | 66