Modifying The Username And Password For The Scopia Xt Series Web Interface - RADVision scopia xt5000 series Administrator's Manual

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
To modify the PIN, you must be connected via HTTPS (see
Scopia XT Series
Procedure
1. Access the user PIN settings, as follows:
2. Set Enable to Yes.
3. If you previously set a user PIN, enter it in the Old PIN Code field.
4. Enter your new 4 digit PIN code.
5. Save your changes as follows:
Administrator Guide for Scopia XT5000 Series Version 3.2
on page 33).
• From the endpoint's main menu, select Configure > Advanced > Utilities > PIN
Protect Settings > Basic Settings.
You need to enter the PIN required to access the Advanced settings. The default PIN
is 1234.
• From the XT Series web interface, select Administrator Settings > Utilities > PIN
Protect Settings > Basic.
Figure 72: Modifying the user PIN
From the web interface only, re-enter your new PIN in the Confirm PIN Code field.
• From the endpoint, select Done.
• From the web interface, select Save.
Use this new PIN the next time you are required access basic settings.
on page 44.
Enabling Remote Management on the
Maintaining the Scopia XT Series | 125