Registering And Enabling Your Scopia Xt Series License; Registering The Scopia Xt Series To Obtain A License Key - RADVision scopia xt5000 series Administrator's Manual

Chapter 4 | Initial Configuration
After connecting the system and powering it on as described in Installation Guide for Scopia XT Series, perform the
initial configuration as described in these sections:
Navigation
•

Registering and Enabling your Scopia XT Series license

•
Performing Basic Configuration
•
Configuring Video Connections
•
Configuring Audio Connections
•
Configuring Network Settings
Registering and Enabling your Scopia XT Series license
About this task
To activate the features of your XT Series, you first register the product to obtain your license key, and
then enable the license. Follow the workflow described in this section.
If you do not yet have your license key, you can set up the system in demo mode for a period of 24
hours. After this time, you must enable your license key to use the system.
Procedure
1. Register your system to activate your license key, as described in
2. Enable the license from either the endpoint or the web interface:
3. If you are enabling licenses with additional features, such as an embedded MCU or higher
Administrator Guide for Scopia XT5000 Series Version 3.2
on page 54
on page 70
on page 80
on page 88
Series to Obtain a License Key
•
Remotely Enabling the License from the Web Interface
•
Enabling the License from the Scopia XT Series Endpoint
bandwidth, see Installing and Enabling Licenses which Extend System Functionality
48.
on page 47
on page 47.
Registering the Scopia XT
on page 50
on page 52
on page
Initial Configuration | 47