Sntp Settings; Time Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

SNTP Settings

Time Settings

To configure the time settings for the Switch, click Configuration > SNTP Settings > Time Settings:
The following parameters can be set or are displayed:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second Server
SNTP Poll Interval in
Seconds (30-99999)
Date (DD/MM/YYYY)
Time in (HH:MM:SS)
Click Apply to implement changes made.
Figure 6- 25. Time Settings window
Description
Use the radius button to select an Enabled or Disabled SNTP state.
Displays the Current Time set on the Switch.
Displays the time source for the system.
This is the IP address of the primary server the SNTP information will be taken from.
This is the IP address of the secondary server the SNTP information will be taken from.
This is the interval, in seconds, between requests for updated SNTP information.
Enter the current date in day, month and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Status
SNTP Settings
Set Current Time
44