Acl Finder; Acl Flow Meter - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 10- 48. CPU Access Rule Detail Information window for Packet Content

ACL Finder

This window is used to help find a previously configured ACL entry. To search for an entry, enter the profile ID from
the drop down menu, select a port that you wish to view, define the state and click Find, the table on the lower half of
the screen will display the entries. To delete an entry click the corresponding Delete button.
To open this window, click ACL > ACL Finder:

ACL Flow Meter

ACL Flow Metering Table is a per flow bandwidth control used to limit the bandwidth of the ingress traffic. When the
users create an ACL rule to filter packets, a metering rule can be created to associate with this ACL rule to limit traffic.
The step of bandwidth is 64kbps. Due to limited metering rules, not all ACL rules can associate with a metering rule.
To open this window, click ACL > ACL Flow Meter:
The following fields may be configured:
Parameter Description
Profile ID The pre-configured Profile ID for which to configure the Flow Metering parameters.
Access ID The pre-configured Access ID for which to configure the Flow Metering parameters.
Enter the appropriate information and click Find, the entries will be displayed on the lower half of the table. To edit an
entry click the corresponding Modify button, to delete an entry click the corresponding Delete button, to add a new
entry click the Add button which will display the following window for the user to configure.
Figure 10- 4 . ACL Finder window 9
Figure 10- 5 . ACL Flow Meter window 0
203