Port Security Fdb Entries - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
The following parameters can be set:
Parameter
From Port/To Port
Admin State
Max. Learning
Address (0-64)
Lock Address
Mode
Click Apply to implement changes made.

Port Security FDB Entries

This table is used to clear the Port Lock Entries by individual ports, to clear entries enter the range of ports and click
Clear.
To view the following window click, Security > Port Security > Port Security FDB Entries
Figure 9- 9. Port Security Settings window
Description
A consecutive group of ports may be configured starting with the selected port.
This pull-down menu allows you to enable or disable Port Security (locked MAC address table
for the selected ports).
The number of MAC addresses that will be in the MAC address-forwarding table for the
selected switch and group of ports.
This pull-down menu allows you to select how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are:
Permanent – The locked addresses will not age out after the aging timer expires.
DeleteOnTimeout – The locked addresses will age out after the aging timer expires.
DeleteOnReset – The locked addresses will not age out until the Switch has been
reset.
133