Lldp Dot3 Tlvs Settings; Lldp Statistics System - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Click Apply to implement changes made.

LLDP Dot3 TLVs Settings

To view this window, Click L2 Features > LLDP > LLDP Dot3 TLVs Settings
The following parameters can be set:
Parameter Description
From Port/To
Use the drop-down menu to select a range of ports to be configured.
Port
MAC/PHY
Use the drop-down menu to configure the advertise MAC or PHY status of the switch.
Configuration
Status
Link Aggregation
Use the drop-down menu to enable or disable the advertise link aggregation state on the Switch.
Maximum Frame
Use the drop-down menu to enable or disable the advertise Maximum Frame Size.
Size
Click Apply to implement changes made.

LLDP Statistics System

LLDP Statistics System allows you to view the LLDP Stastics on the Switch and also the settings for individual ports.
Use the drop-down menu to check a specific port and click Find the information will be displayed in the lower half of
the table.
To view this window, Click L2 Features > LLDP > LLDP Statistics System
Figure 7- 51. LLDP Dot3 TLVs Settings window
111