Dscp Map Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

DSCP Map Settings

This window is used to enable DSCP Map Settings.
To view this window click QoS > SRED > DSCP Map Settings
The following parameters may be set:
Parameter Description
From port/To port A consecutive group of ports may be configured starting with the selected port.
DSCP Map Use the drop-down menu to choose a DSCP Map, you can choose between DSCP Priority,
DSCP DSCP and DSCP Color.
DSCP List(0-63) This field allows the user to enter a DSCP value in the space provided, which will instruct the
Switch to examine the DiffServ Code part of each packet header and use this as the, or part of
the criterion for forwarding. The user may choose a value between 0 and 63.
Priority This parameter is specified if you want to re-write the 802.1p default priority previously set in the
Switch, which is used to determine the CoS queue to which packets are forwarded to. Once this
field is specified, packets accepted by the Switch that match this priority are forwarded to the
CoS queue specified previously by the user.
Figure 8- 11. DSCP Map Settings window
124