xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
To set the Local Enable Password, set the following parameters and click Apply.
Parameter
Old Local Enable
Password
New Local Enable
Password
Confirm Local Enable
Password
RADIUS Accounting Services
The Accounting feature of the Switch uses a remote RADIUS server to collect information regarding events occurring
on the Switch. The following is a list of information that will be sent to the RADIUS server when an event triggers the
Switch to send these informational packets.
•
Account Session ID
•
Account Status Type
•
Account Terminate Cause
•
Account Authentic
•
Account Delay Time
•
Account Session Time
There are three types of Accounting that can be enabled on the Switch.
Network – When enabled, the Switch will send informational packets to a remote RADIUS server when network
events occur on the Switch.
Shell – When enabled, the Switch will send informational packets to a remote RADIUS server when a user either logs
in, logs out or times out on the Switch, using the console, Telnet, or SSH.
System - When enabled, the Switch will send informational packets to a remote RADIUS server when system events
occur on the Switch, such as a system reset or system boot.
Remember, this feature will not work properly unless a RADIUS Server has first been configured. This RADIUS server
will format, store and manage the information collected here.
To enable the RADIUS Accounting Settings on the switch, click Security > Access Authentication Control >
RADIUS Accounting Settings
Description
If a password was previously configured for this entry, enter it here in order to change it to
a new password
Enter the new password that you wish to set on the Switch to authenticate users
attempting to access Administrator Level privileges on the Switch. The user may set a
password of up to 15 characters.
Confirm the new password entered above. Entering a different password here from the
one set in the New Local Enabled field will result in a fail message.
Figure 9- 42. RADIUS Accounting Setting
•
Username
•
Service Type
•
NAS IP Address
•
NAS Identifier
•
Calling Station ID
160