Sntp Settings - D-Link DES-3250TG User Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
Figure 6- 29. Bandwidth Settings window
To use the bandwidth feature, enter the port or range of ports
in the From and To fields. The third field allows you to set the
type of packets being received and/or transmitted by the
Switch. Toggle the no_limit setting to Enabled in the fourth
field, or if you prefer, manually enter a value in the Rate field,
and then click Apply. Please note that if no_limit is Enabled,
the Switch will not permit you to set the bandwidth rate
manually.

SNTP Settings

The DES-3250TG supports Simple Network Time Protocol
(SNTP), an adaptation of the Network Time Protocol (NTP). As
114