D-Link DES-3528 User Manual page 197

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
To return to the Access Profile List click Show All Profiles, to add a rule to a previously configured entry click on the
corresponding Add/View Rules, which will reveal the following window.
The following parameters may be configured for the IP (IPv4) filter.
Parameter
Access ID (1-128)
Action
Priority (0-7)
Figure 10- 12. Access Profile Details (IPv4)
Figure 10- 13. Access Profile (IPv4)
Description
Type in a unique identifier number for this access. This value can be set from 1 to 128.
Select Permit to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are not forwarded
by the Switch and will be filtered.
Select Mirror to specify that packets that match the access profile are mirrored to a port
defined in the config mirror port command. Port Mirroring must be enabled and a target port
must be set.
Enter a priority value if you want to re-write the 802.1p default priority of a packet to the
value entered in the Priority field, which meets the criteria specified previously in this
command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have
181