xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 7- 30. IP Multicast Address Group List Settings – Group List window
Enter the multicast Address List starting with the lowest in the range, and click Add. To return to the IP Multicast
Profile Settings window, click the <<Back button.
Limited Multicast Range Settings
The Limited Multicast Range Settings enables the user to configure the ports on the switch that will be involved in
the Limited IP Multicast Range. The user can configure the range of multicast ports that will be accepted by the
source ports to be forwarded to the receiver ports. To configure these settings, click L2 Features > IGMP Snooping
> Limited Multicast Range Settings:
Figure 7- 31. Limited Multicast Range Settings window
To add a new range enter the information and click Add, to delete an entry enter the information and click Delete.
Multicast Filtering Mode
The Multicast Filtering Mode enables the user to configure the ports on the switch that will be involved in the
Multicast Filtering Mode. To configure these settings, click L2 Features > IGMP Snooping > Multicast Filtering
Mode:
92