Web-Based Access Control User Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Redirection Page
Port List
Click Apply to implement changes made.
NOTE: To enable the Web-based Access Control function, the redirection path field must have
the URL of the website that users will be directed to once they enter the limited resource, pre-
configured VLAN. Users who attempt to Apply settings without the Redirection Page field set
will be prompted with an error message and Web-based Access Control will not be enabled.
The URL should follow the form http(s)://www.dlink.com
NOTE: The subnet of the IP address of the authentication VLAN must be the same as that of
the client, or the client will always be denied authentication.
NOTE: A successful authentication should direct the client to the stated web page. If the client
does not reach this web page, yet does not receive a Fail! message, the client will already be
authenticated and therefore should refresh the current browser window or attempt to open a
different web page.

Web-based Access Control User Settings

To configure the Switch for Web Authentication Settings, open the Security > Web Authenication > Web-based
Access Control User Settings
Parameter
User Name
Password
RADIUS server. This VLAN should be pre-configured to have limited access rights to web
based authenticated users.
Enter the URL of the website that authenticated users placed in the VLAN are directed to once
authenticated. This path must be entered into this field before the Web-based Access Control
can be enabled.
Specify the ports to be enabled as Web-based Access Control ports. Only these ports will
accept authentication parameters from the user wishing limited access rights through the
Switch. When one client on a port has been authenticated for Web-based Access Control, all
clients on this port are authenticated as well.
Use the State pull-down menu to enable these configured ports as Web-based Access Control
ports.
Figure 9- 46. Web-based Access Control User Settings window
Description
Enter the username of up to 15 alphanumeric characters of the guest wishing to access the
web through this process. This field is for administrators who have selected local as their web
based authenticator.
Enter the password the administrator has chosen for the selected user. This field is case
sensitive and must be a complete alphanumeric string. This field is for administrators who
Create User
166