System Log Configuration; System Log Settings; System Log Server - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

System Log Configuration

This section contains information for configuring various attributes and properties for System Log Configurations,
including System Log Settings and System Log Host.

System Log Settings

This window allows the user to enable or disable the System Log and specify the System Log Save Mode Settings. To
configure the system log settings click Configuration > System Log Configuration > System Log Settings:
The following parameters can be set:
Parameter
Save Mode
Minutes (1-65535)
To add a new entry, enter the appropriate information and click Apply. To save the current Log Settings, click Save
Log Now.

System Log Server

The Switch can send Syslog messages to up to four designated servers using the System Log Server.
To configure the system log settings click Configuration > System Log Configuration > System Log Server:
The following parameters can be set:
Parameter
Server ID
Server IP Address
UDP Port
(514 or 6000-65535)
Severity
Figure 6- 10. System Log Settings window
Description
Use this drop-down menu to choose the method that will trigger a log entry. You can choose
between On Demand, Log Trigger, and Time Interval.
Enter a time interval, in seconds, for which you would like a log entry to be made.
Figure 6- 11. System Log Server window
Description
Syslog server settings index (1-4).
The IP address of the Syslog server.
Type the UDP port number used for sending Syslog messages. The default is 514.
This drop-down menu allows you to select the level of messages that will be sent. The options
are Warning, Informational, and All.
33