D-Link DES-3528 User Manual page 208

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Parameter Description
Select Profile ID Use the drop-down menu to select a unique identifier number for this profile set. This value can
(1-5) be set from 1 to 5.
Select ACL Type Select profile based on Ethernet (MAC Address), IP address, IPv6, or packet content mask. This
will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select IPv6 to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet header.
Source MAC Enter a MAC address mask for the source MAC address.
Mask
Destination MAC Enter a MAC address mask for the destination MAC address.
Mask
802.1Q VLAN Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
802.1p Selecting this option instructs the Switch to specify that the access profile will apply only to
packets with this 802.1p priority value.
Ethernet Type Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Click Apply to set this entry in the Switch's memory.
To view the settings of a previously correctly created profile, click the corresponding Show Details button on the CPU
Access Profile List window to view the following window:
Figure 10- 2 . Add CPU ACL Profile window for Ethernet 9
192