802.1X Force Disconnect; 802.1X Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

802.1X Force Disconnect

To configure the 802.1X Force Disconnect, click Security > 802.1X > 802.1X Force Disconnect
Use the drop down menu to select either Port or MAC Address and enter the corresponding information, click Force
Disconnect for the changes to take effect.

802.1X Settings

To configure the 802.1X Settings, click Security > 802.1X > 802.1X Settings
This window allows you to set the following features:
Parameter Description
Auth Mode The Auth Mode allows the user to choose among, Disabled, Port Based or MAC Based
Authentication Mode.
Auth Protocol Choose the Auth Protocol either RADIUS EAP or Local.
Forward EAPOL This enables or disables the Switch retransmit EAPOL PDU Request.
PDU
From Port/To Enter the port or ports to be set.
Port
Figure 9- 21. 802.1X Force Disconnect window
Figure 9- 22. 802.1X Settings window
141