Ports; Front-Panel Components; Led Indicators - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Supports STP Loopback Detection
Safeguard Engine Support

Ports

Twenty-four high-performance (MDI-X/MDI-II) ports for connecting to end stations, servers, hubs and other
networking devices.
All UTP ports can auto-negotiate between 10Mbps and 100Mbps, half-duplex and full duplex, and feature flow
control.
Two SFP combo ports for connecting to another switch, server, or network backbone.
RS-232 DCE Diagnostic port (console port) for setting up and managing the Switch via a connection to a console
terminal or PC using a terminal emulation program.

Front-Panel Components

The front panel of the Switch consists of LED indicators for power and for each 10/100 Mbps twisted-pair ports, and
two combo 1000Base-T/SFP ports.
Comprehensive LED indicators display the status of the Switch and the network.

LED Indicators

The Switch supports LED indicators for Power, Console, RPS and Port LEDs. The following shows the LED indicators
for the DES-3528 switch along with an explanation of each indicator. LEDs and there corresponding meanings are
displayed below.
LED indicators
Location
Per Device
NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP
management software, go to the D-Link Website (www.dlink.com) and download the
software and manual.
Figure 1- 1. Front Panel View of the DES-3528 switch
Figure 1- 2. LED Indicators on DES-3528 switch
LED Indicative
Power
Console
Color Status
Solid Light
Green
Light off
Solid Light
Green Blinking
Light off
2
Description
Power On
Power Off
Console on
POST is in progress.
Console off