Sntp Settings - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
To: Month
To: Time (HH:MM)
Offset
The fields that can be configured for Date Setting are described below:
Parameter
From: Date of the Month
From: Month
From: Year
From: Time (HH:MM)
To: Date of the Month
To: Month
To: Year
To: Time (HH:MM)
Offset
Click the Apply button to accept the changes made.

SNTP Settings

This window is used to configure the time settings for the Switch.
To view the following window, click System > Time and SNTP > SNTP Settings, as shown below:
The fields that can be configured for SNTP Global Settings are described below:
Parameter
SNTP State
Poll Interval
Select the month that summer time will end.
Select the time of the day that summer time will end.
Enter the number of minutes to add during summer time. The default
value is 60. The range of this offset is 30, 60, 90 and 120.
Description
Select date of the month that summer time will start.
Select the month that summer time will start.
Enter the year that the summer time will start.
Select the time of the day that summer time will start.
Select date of the month that summer time will end.
Select the month that summer time will end.
Enter the year that the summer time will end.
Select the time of the day that summer time will end.
Enter the number of minutes to add during summer time. The default
value is 60. The range of this offset is 30, 60, 90 and 120.
Figure 3-22 SNTP Settings window
Description
Select this option to enable or disable SNTP.
Enter the synchronizing interval in seconds. The value is from 30 to
99999 seconds. The default interval is 720 seconds.
28