Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
From: Time
To: Week of the Month
To: Day of the Week
To: Month
To: Time
Offset
The fields that can be configured in Date Settings are described below:
Parameter
From: Date of the Month
From: Month
From: Year
From: Time
To: Date of the Month
To: Month
To: Year
To: Time
Offset
Click the Apply button to accept the changes made.
SNTP Settings
The Simple Network Time Protocol (SNTP) is a protocol for synchronizing computer clocks through the Internet. It
provides comprehensive mechanisms to access national time and frequency dissemination services, coordinate the
SNTP subnet of servers and clients, and adjust the system clock on each participant.
This window is used to display and configure the SNTP settings for the Switch.
To view the following window, click System > Time and SNTP > SNTP Settings, as shown below:
Description
Select the time of the day that summer time will start.
Select week of the month that summer time will end.
Select the day of the week that summer time will end.
Select the month that summer time will end.
Select the time of the day that summer time will end.
Enter the number of minutes to add during summer time. The default value is
60. The range of this offset is 30, 60, 90 and 120.
Description
Select date of the month that summer time will start.
Select the month that summer time will start.
Enter the year that the summer time will start.
Select the time of the day that summer time will start.
Select date of the month that summer time will end.
Select the month that summer time will end.
Enter the year that the summer time will end.
Select the time of the day that summer time will end.
Enter the number of minutes to add during summer time. The default value is
60. The range of this offset is 30, 60, 90 and 120.
Figure 3-25 SNTP Settings Window
28
Advertisement
Table of Contents
