Ip Multicast Profile Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
VID (2-4094) This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to
modify the IGMP Snooping Settings for.
State Use the drop-down menu to toggle between Enabled and Disabled.
Enter an IP address that new IP address to be used.
Replace Source IP
Member Port Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)
(e.g.:1-4,6)
Source Port Select the source Port for the Multicast VLAN.
(e.g.:1-4,6)
Tagged Member Select the ports that will be tagged as members of the VLAN.
Port
To modify an entry click the corresponding Modify, To edit and entry click the corresponding Edit button and to delete
an entry click the corresponding Delete button.

IP Multicast Profile Settings

The IP Multicast Profile Settings window allows the user to add a profile to which multicast address(es) reports are
to be received on specified ports on the Switch. This function will therefore limit the number of reports received and
the number of multicast groups configured on the Switch. The user may set an IP Multicast address or range of IP
Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the specified switch ports. To
configure the IP Multicast Profile settings, click L2 Features > IGMP Snooping > IP Multicast Profile Settings:
The following fields can be set
Parameter Description
Profile ID Use the drop-down menu to choose a Profile ID.
Profile Name Enter a name for the IP Multicast Profile.
To edit and entry click the corresponding Edit button and to delete an entry click the corresponding Delete button.
To configure the Group List Settings click the hyperlinked
Figure 7- 28. IP Multicast Profile Settings window
Figure 7- 29. IP Multicast Profile Settings – Edit window
Group List.
91