Dhcp Offer Filtering - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
The user may set the following parameters:
Parameter
From Port/To Port
State
After setting the previous parameters, click Apply to allow your changes to be implemented. The DHCP Port
Information Table shows which ports are enabled or disabled for DHCP Sever Screening.

DHCP Offer Filtering

The following window will allow users to configure the DHCP Server Settings on the switch. To view this window, click
Security > DHCP Server Screening > DHCP Offer Filtering:
The user may set the following parameters:
Parameter
Server IP Address
Client's MAC Address
Ports
After setting the previous parameters, click Apply to allow your changes to be implemented.
Description
A consecutive group of ports may be configured starting with the selected port.
Choose Enabled to enable the DHCP server or Disabled to disable. The default is Disabled.
Figure 9- 12. DHCP Offer Filtering window
Description
The IP address of the DHCP server.
The MAC address of the Client.
Choose the range of ports that you want to use as the DHCP server, or check the All Ports
box if you wish to use all the ports on the switch.
135