Jwac Port Settings - D-Link DES-3528 User Manual

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

JWAC Port Settings

To view JWAC port settings for the Switch, click Security > JWAC > JWAC Port Settings.
To set the JWAC on individual ports for the Switch, complete the following fields:
Parameter
From Port / To Port
Aging Time
(1-1440 Minutes)
MAX Authenticating
Host
Idle Time
(1-1440 Minutes)
Block Time
(0-300 Seconds)
State
Click Apply to implement changes made.
Figure 9- 48. JWAC Port Settings window
Description
Lists the range of Ports that will be configured in this window.
This parameter specifies the period of time a host will keep in authenticated state after it
successes to authenticate. Enter a value between 1 and 1440 minutes. The default setting is
1440 minutes. To maintain a constant Port Configuration tick the Infinite check box in the
JWAC configuration window.
This parameter specifies the maximum number of host process authentication attempts
allowed on each port at the same time.
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between 1 and 1440 minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
This parameter specifies the period of time a host will keep in a blocked state after it fails to
authenticate. Enter a value between 0 and 300 seconds. The default setting is 0 seconds.
This parameter specifies the state of the configured ports.
169