Armrest; Replacing The Armrest - Minelab F3Ci Service Manual

_______________________________________________________________________________________________________________________
b. Assemble the detector and close the detector body as described in Section
the Detector Body.

Armrest

3.7
a. The armrest is a line replaceable unit with or without slide as shown in Figure 86.
3004-0049 Armrest Kit
3.7.1 Replacin t e Armrest
a. To replace the armrest:
Prepare a clean well lit workspace.
•
Turn the detector off and remove the batteries.
•
Remove the four 12mm round head screws from the top of the armrest and remove
•
the armrest.
Figure 83: Correct Position of Wiring Loom Handle
Figure 84: Armrest Service Kits
3004-0048 Armrest Kit with Slide.
49
F3Ci Service Manual
3.2 - Closing