Armrest - Minelab F3 Service Manual

3.12

Armrest.

Figure 58 illustrates the major parts of the armrest.
3004-0034
1 31-24000-780
2 31-24030-980
3 4308-0003
4&5 3004-0015
6 8008-0005
7 8008-0070
8 8008-0030
9 8005-0018
a. To Disassemble the Armrest:

Remove the armrest if required. If the electronics pack has been removed the
armrest can be slid off the upper shaft.

Undo and remove the three bolts and nuts holding the armrest halves together.

Carefully pull the armrest halves apart exposing the cam lever, (Part 6), cam
lever pivot pin (Part 3), and armrest pressure block (Part 7).

Inspect and replace parts as required.
Figure 58: Armrest.
Table 7: Armrest.
Armrest Kit F3, All items in this table
Nut M4 Nyloc
Bolt M4x30 Skt Cap
Pin Cam Lever
Armrest Left & Right
Cam Lever
Pressure Block Armrest
Wear Plate
Strap Armrest
Page 57
F3 Service Manual