Minelab F3Ci Service Manual page 28

_______________________________________________________________________________________________________________________
Earset Cable
Assembly
internal
Align the ribbon cable with its connector. Slide the connector locking bails outwards
•
(up) to accept the ribbon cable.
Insert the ribbon cable into the connector then push the locking bail in to secure.
•
4. Locking Bail closed
Connect the battery connector to the main PCB.
•
1. Open Locking Bail
Figure 41: Connecting Ribbon Cable
Figure 40: Connectors
2. Insert Ribbon Cable
3. Hold Ribbon Cable
28
F3Ci Service Manual
Wiring Loom Handle
Vibration Motor
Connector