Minelab F3Ci Service Manual page 18

_______________________________________________________________________________________________________________________
The hinge cover holds the latch hinge and spring latch hinge in place. When the hinge cover
is removed the spring may unintentionally disconnect from the latch.
Ensure the battery lid is closed.
•
Connect the speaker cable to the connector on the main PCB. Check all other
•
connectors and cables are connected.
Speaker Connector
Speaker Assembly
Check the O-ring in the detector body is clean, lightly greased and correctly
•
positioned.
Check all internal cables and wires are correctly positioned and will not be trapped.
•
The coil cable must be located within the shaft hinge so that it is not trapped or
•
damaged when the halves of the detector body are fitted together. In particular, the
coil cable must not be positioned above the hinge screw bosses.
Figure 19: Connecting Speaker
Figure 20: Coil Cable Position in Shaft Hinge
18
F3Ci Service Manual
Coil Cable
Must Not be
above these
areas