Minelab F3Ci Service Manual page 5

_______________________________________________________________________________________________________________________
2.1 Mec anical estin
a. Confirm all parts and accessories are present and in good working order. Unpack the
detector and prepare for use. Figure 2 identifies the major components of the F3Ci. Mechanical
testing and inspection includes checking:
The detector for any obvious signs of damage,
•
Coil movement is smooth in both axes and holds its position without drooping,
•
The skid plate is attached and has no holes or cracks,
•
Shafts extend and retract smoothly and the camlocks hold the shafts firmly in
•
location,
The shaft hinge moves freely when the handle is stowed down and locks into
•
extended position when the handle is deployed up,
The battery lid opens and locks, the battery lid tether is in good condition, and the
•
battery lid O-ring is clean and in good condition,
The handle slides up and down freely locking into position,
•
The armrest extends and retracts smoothly,
•
The armrest strap is in good condition,
•
The earset dust caps are in good condition, and
•
Sensitivity and On/Off knobs do not turn unless lifted and rotated and then spring
•
back into the locked position when released.
b. The detector must pass all mechanical tests and checks to be considered acceptable for
operational use.
Figure 2: F3Ci Major Components
5
F3Ci Service Manual