Wiring Loom Handle Socket Replacement - Minelab F3Ci Service Manual

_______________________________________________________________________________________________________________________
Disconnect the wiring loom earset from the main PCB.
•
Unscrew the 13mm nut from the earset connector and remove the nut and the
•
connector dust cover.
The wiring loom earset can now be removed and replaced as required. The wiring loom
c.
earset is fitted to the detector following the reverse order of the removal.
3.9.4 Wirin Loom Handle Socket Replacement
The wiring loom handle socket is a line replaceable unit and is available as a service kit,
a.
3004-0056 Wiring loom Handle Socket Kit, which includes associated parts. Figure 95 illustrates
the major parts of wiring loom handle Socket.
1
3004-0056
2 9511-0136
3 30-29011-519
4 30-05214-001
b. Open the detector body as described in Section
completed:
Disconnect the wiring loom handle socket from the handle wiring loom.
•
Disconnect the wiring loom handle socket from the main PCB.
•
Remove the E-Clip from the wiring loom handle socket at the entry point to the
•
detector body.
30-29011-519
9511-0136
Figure 95: Wiring Loom Handle Socket Kit
Wirin Loom Handle Socket Kit, contains all
items in this table
Wiring Loom Handle Socket
O-Ring BS012
Circlip External 7mm
Table 10: Wiring Loom Handle Socket Kit
3.1 - Opening the Detector
57
F3Ci Service Manual
30-05214-001
Body. Once