Minelab F3Ci Service Manual page 14

_______________________________________________________________________________________________________________________
Figure 10: Disconnecting Coil Plug and Removing Screws
Turn the detector over onto its left side with speaker grill uppermost.
•
Using the 3mm hex key driver, remove all eight screws from the detector body.
•
There are four 35mm long screws and four 20mm long screws.
Using a T20 Torx (star) driver unscrew all four screws (three 35mm and one 20mm)
•
from the right side of the detector.
•
Figure 11: Removing Eight Screws (Allen Key)
Figure 12: Removing Four Torx Screws
Note
14
F3Ci Service Manual