Number Of Paper Feeding Retries - Fujitsu fi-7140 Operator's Manual

Chapter 8 Operational Settings

Number of Paper Feeding Retries

Configure this setting to change the number of feeding retries
when a pick error occurs.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 123).
2
From the listing on the left, select [Device Setting 2] 
[Number of paper feeding retries].
3
Specify the number of paper feeding retries.
The value can range from 1 to 12 times.
Document Feed Speed [Pick Speed]
When multifeeds and paper jams occur frequently, you may be
able to improve the performance by slowing down the speed
in which documents are picked or fed.
This setting is effective when you scan thin paper.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 123).
2
From the listing on the left, select [Device Setting 2] 
[Pick Speed].
3
Specify the document feed speed.
Normal: Normal document feed speed
Slow: The document feed speed is slower than normal
ATTENTION
The total time for scanning is longer because the document feed
speed slows down.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
147