Operational - Fujitsu fi-7140 Operator's Manual

Chapter 2 How to Load Documents
HINT
 When scanning semi-transparent documents, increase the
brightness for scanning to avoid bleed-through.
 When you scan documents written in lead pencil, make sure to clean
the rollers frequently. Otherwise, the rollers will be contaminated
which may leave black traces on the document or cause feeding
errors.
For details about cleaning, refer to
 If multifeeds, pick errors, or paper jams occur frequently, refer to
Troubleshooting" (page 99).
 When you scan documents with the ADF, all documents must be flat
on the leading edge. Make sure that curls on the leading edge of the
documents are kept within the following range:
30 mm or more
(1.18 in.)
Feeding direction
3 mm
5 mm
or less
or less
(0.12 in.) (0.20 in.)
Leading edge Leading edge
Scanned side
"Chapter 5 Daily Care" (page 72).
"7.3
30 mm or more
(1.18 in.)
Feeding direction
Scanned side
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
43