Operational - Fujitsu fi-7140 Operator's Manual

Chapter 4 Various Ways to Scan
3
Adjust the stacker to fit the longest document.
For details, refer to "Documents with Different Sizes" (page
4
In the scanner driver, configure the scan settings to detect
the paper size automatically.
For details, refer to the scanner driver's Help.
5
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
Documents Larger than A4/Letter Size
32).
The Carrier Sheet can be used to scan documents larger than
A4/Letter size, such as A3 or B4. By folding the document in
half and scanning in duplex mode, the two sides are merged
into a single image.
ATTENTION
Part of the image around where the document is folded may appear
missing. Using the Carrier Sheet is not recommended for obtaining high
quality image.
HINT
You can also scan a double-sided document the size of which is A4 or
smaller, and output the image as a double-page spread image.
In this case, place the double-sided document the size of which is A4 or
smaller inside the Carrier Sheet shown in step 2.
1
Place the document inside the Carrier Sheet.
1 Fold the document in half so that the sides to be scanned are
facing out.
Fold it tightly and smooth out any creases.
Otherwise, it may cause the document to skew while the feeding is
in progress.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
57