Operational - Fujitsu fi-7140 Operator's Manual

Chapter 7 Troubleshooting
■
Sensor Error
The letter "L" and an alarm number appear alternately.
Display Description
L0 A sensor error
L2 occurred.
L6 A sensor error
occurred.
Action
1 Clear any paper dust around the
document sensors.
2 Turn the scanner off then back on.
If the problem persists, write
down the displayed error code
and contact your FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider.
1 Clear any paper dust around the
ultrasonic sensors.
2 Turn the scanner off then back on.
If the problem persists, write
down the displayed error code
and contact your FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
98