Specifying The Number Of Feeding Retries [Number Of Paper Feeding Retries] - Fujitsu fi-7800 Operator's Manual

Specifying the Number of Feeding Retries [Number of paper feeding retries]

Configure this setting to change the number of feeding retries upon pick errors.
1
Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page
2
From the list on the left, select [Device Setting 2] → [Number of paper feeding retries].
3
Specify the number of paper feeding retries.
The value can range from 1 to 12 times.
HINT
This setting can also be configured from the operator panel.
193).
232
Operational Settings