Specifying the Number of Retries for Paper Feeding
[Number of Paper Feeding Retries]
Specify the number of feeding retries when a document is not fed from the ADF paper chute (feeder).
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting 2] → [Number of paper feeding retries].
3
Specify the number of paper feeding retries.
The value can range from 1 to 12 times.
The factory default setting is "3 times".
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
241).
273