Specifying the Number of Retries for Paper Feeding [Number of paper feeding
retries]
Specify the number of feeding retries when a document is not fed from the ADF paper chute (feeder).
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting 2] → [Number of paper feeding retries].
3
Specify the number of paper feeding retries.
The value can range from 1 to 12 times.
The factory default setting is "3 times".
HINT
For fi-8190/fi-8290/fi-8170/fi-8270, this setting can also be configured in the operator panel.
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
333).
366