Chapter 7 Troubleshooting
Vertical streaks appear on the scanned image.
Do the streaks always appear in the same location?
No
Does the vertical streak disappear when you set a lower
resolution?
No
Is there any foreign matter (such as dust or paper dust) on
the document?
No
Clean the glass and rollers inside the ADF, or the document bed of the flatbed (fi-
7240).
Yes
For details, refer to
"Chapter 5 Daily Care" (page
Specify a lower resolution.
Yes
Remove any foreign matter off the document.
Foreign matter may get on the glass inside the ADF or the document bed of the
Yes
flatbed (fi-7240), and may cause vertical streaks to appear on the scanned image.
If the problem persists, check the items in
Service Provider" (page 119)
an authorized FUJITSU scanner service provider.
72).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
107