Situation In Which The Document Is Not Fed Into The Adf Occurs Frequently - Fujitsu fi-7140 Operator's Manual

Chapter 7 Troubleshooting
Situation in which the document is not fed into
the ADF occurs frequently.
Do the documents meet the requirements described in
"Precautions" in "Conditions" (page
Yes
Did you fan the documents before loading them in the ADF
paper chute (feeder)?
Yes
Are the consumables installed correctly?
(*1)
Yes
Are the consumables clean?
(*1)
Yes
Are the consumables worn out?
(*1)
No
*1: "Consumables" refers to the brake roller and the pick roller.
Use documents that meet the requirements.
41)? For details, refer to
No
Fan the documents before loading them. Or reduce the amount of documents.
No
Install the consumables
For details, refer to
No
Clean the consumables
For details, refer to
No
Check the consumable counters and replace them if necessary.
For details, refer to
Yes
If the problem persists, check the items in
Service Provider" (page 119)
an authorized FUJITSU scanner service provider.
"2.3 Documents for Scanning" (page
correctly.
(*1)
"Chapter 6 Replacing the Consumables" (page
.
(*1)
"Chapter 5 Daily Care" (page 72).
"Chapter 6 Replacing the Consumables" (page
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
Contents
Introduction
Scanner
41).
Overview
How to Load
Documents
How to Use the
Operator Panel
83).
Various Ways to
Scan
Daily Care
83).
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
TOP
Index
111