Chapter 6 Replacing the Consumables
6.3 Replacing the Pick Roller
Replace the pick roller in following procedure.
1
Remove all documents from the ADF paper chute
(feeder).
2
Remove the ADF paper chute (feeder).
Hold both ends of the ADF paper chute (feeder), then lift it in the
1
direction of arrow
and pull it out in the direction of arrow
1
3
Open the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page
When the ADF is open, it might close
accidentally. Be careful not to get your fingers
caught.
2
.
2
ADF Paper Chute
(Feeder)
25).
4
Remove the pick roller.
1 Open the sheet guide by lifting the tab.
2 Rotate the bushing on the shaft.
Contents
Introduction
Scanner
Overview
How to Load
Documents
Tab
How to Use the
Operator Panel
Sheet Guide
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Bushing
Troubleshooting
Shaft
Operational
Settings
Appendix
Glossary
TOP
Index
87