Operational - Fujitsu fi-7140 Operator's Manual

Chapter 4 Various Ways to Scan
Scanning a Large Document on the Flatbed
(fi-7240)
1
Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7240)" (page 26).
2
Remove the document cover by pulling it out in the
direction of the arrow.
3
Load the document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
Reference Point
4
Configure the scan settings in the scanner driver to use
the flatbed.
For details, refer to the scanner driver's Help.
5
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
Do not look directly into the light source.
ATTENTION
Do not move the document during scanning.
6
Attach the document cover.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
64