Operational - Fujitsu fi-7140 Operator's Manual

Chapter 8 Operational Settings
■
Messages for Cleaning or Replacing Consumables
The following message may appear while the scanner is in
use:
Message for replacing consumables
Message for cleaning
Check the message, and replace the consumable or perform
cleaning accordingly.
If you click the [Ignore] button, the message disappears and
the scan can be continued. However, it is recommended that
you replace the consumable as soon as possible.
To stop the scan and replace the consumable right away, click
the [Cancel] button.
For details about replacing consumables, refer to the
following:
 Brake roller
"6.2 Replacing the Brake Roller" (page 85)
 Pick roller
"6.3 Replacing the Pick Roller" (page 87)
For details about cleaning, refer to
(page 72).
"Chapter 5 Daily Care"
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
139