Operational - Fujitsu fi-7140 Operator's Manual

Chapter 1 Scanner Overview
fi-7240
■Front
Side Guides
Positions the documents in place when the
documents are loaded in the ADF paper
chute (feeder) as they are fed into the
scanner.
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet at a
time from the ADF paper chute (feeder).
Open this to replace consumables or to clean
the inside of the scanner.
Stopper
Lift up to adjust to the document length.
Stacker
Stacks up the ejected documents.
Transport Lock Switch
Locks the carrier unit (which is inside the
flatbed) to prevent damage during
transportation.
Flatbed
For scanning documents (such as thin paper or
books) that cannot be scanned with the ADF.
Chute Extension 2
Pull out to adjust to the document length.
Chute Extension 1
Pull out to adjust to the document length.
ADF Paper Chute (Feeder)
Holds the documents to be scanned.
ADF Release Tab
Pull this tab to open the ADF.
Operator Panel
Consists of a Function Number Display,
buttons, and LED indicator.
Can be used to operate the scanner or check
the status.
For details, refer to "Chapter 3 How to Use
the Operator Panel" (page 51).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
18