Operational - Fujitsu fi-7140 Operator's Manual

Chapter 5 Daily Care
5.2 Cleaning the Outside
The outside of the scanner, including the ADF paper chute
(feeder) and the stacker, should be cleaned with either a piece
of dry cloth, a cloth moistened with Cleaner F1/mild detergent,
or a sheet of Cleaning Wipe.
ATTENTION
 To avoid deformation and discoloration, never use paint thinner or
any other organic solvents.
 Be careful not to let any moisture or water inside the scanner during
cleaning.
 It may take a long time to dry if an excessive amount of Cleaner F1/
mild detergent is used. Use it in small quantity. Wipe off the cleaner
completely to leave no residue on the cleaned parts.
fi-7140
Cloth
Cleaner F1
or Mild Detergent
Thinner
Cleaning Wipe
fi-7240
Cloth
Cleaner F1
or Mild Detergent
Thinner
Cleaning Wipe
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting

Operational

Settings
Appendix
Glossary
75