Error Indications On Operator Panel - Fujitsu fi-7140 Operator's Manual

Chapter 7 Troubleshooting

7.2 Error Indications on Operator Panel

When an error occurs during operation, the LED indicator
lights in orange.
In addition, the indication on the Function Number Display
changes as follows:
 For temporary errors
The letter "J" or "U" and an error code appear alternately.
 For device errors
The letter "E", "F", "C", "H", "A" or "L" and an alarm number appear
alternately.
Temporary errors can be recovered by the operator, whereas
device errors require troubleshooting by a service engineer.
While a temporary error is displayed, press the [Scan/Stop]
button or the [Send to] button to return to the ready status
("1"). Note that a paper jam message disappears after a
certain period of time elapses if there are no documents
([Ready] status) in the scanner.
LED Indicator
Check
Function Number Display
Function
Send to
[Send to] Button
Scan
/Stop
[Scan/Stop] Button
Power
If the Error Recovery Guide is installed in the computer, the
Error Recovery Guide window appears when the Windows
operating system is started up. When an error occurs, the
Error Recovery Guide window displays related information
such as the name of the error and the error code (number).
Write down the information shown in the window and click the
[More Info] button to check for troubleshooting methods.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
94