Table of Contents
Advertisement
OIL PRESSURE INSPECTION
1~8.r11§l1
- Do not allow foreign material to enter the
crankcase.
- Do not add any chemical additives. Engine
oil also lubricates the clutch and additives
could cause clutch slippage.
11. Install:
-Air bleed screw
Air bleed screw:
5 Nm (0.5 m-kg, 3.6 ft-Ib)
12. Inspect:
-Oil level
Refer to the "ENGINE OIL LEVEL INSPEC-
TION" section.
-Oil pressure
Refer to the "OIL PRESSURE INSPEC-
TION" section.
-Oil leaks
13.
Install:
- Oil tank cap
3-22
-Cover
OIL PRESSURE INSPECTION
1.
Remove:
- Air bleed
screw
Q)
2. Start the engine and keep it idling
for
sev-
eral minutes.
3.
Inspect
:
- Oil condition of the bleed hole
Oil flows
out-->
Oil pressure is good.
No oil comes
out-->
Oil pressure is bad.
CAUTION:
If no oil comes out after a lapse of one
minute, turn off the engine immediately so it
will not seize.
4.
Tighten:
- Air bleed screw
Air bleed screw:
5 Nm (0.5 m
•
kg, 3.6 ft· Ib)
Advertisement
Table of Contents
Troubleshooting
