Yamaha XT 600 AC Service Manual page 304

ELECTRICAL STARTING SYSTEM
I ELECI
iii
I
5 .Main switch
• Disconnect the main switch coupler from
the wire harness .
• Connect the pocket tester (Q x 1 ) to the
main switch terminal .
• Check the switch component for the conti-
nuity between " Red
CD
and Brown
® ".
Refer to the "CHECKING OF SWITCHES "
section.
~
CORRECT
6 . "ENGINE STOP " switch
• Disconnect the handlebar switch (right)
lead coupler from the wire harness.
• Connect the pocket tester ( Q
x
1 ) to the
engine stop switch terminal .
• Check the switch component for the conti-
nuity between " Red/ White
CD
and Red /
White
®".
Refer to the "CHECKING OF
SWITCHES " section .
R/W R/W
*
7-26
INCORRECT
1
Main switch is faulty, replace it.
INCORRECT
1
"ENGINE STOP" switch is faulty, replace
handlebar switch (right).