Yamaha XT 600 AC Service Manual page 325

LIGHTING SYSTEM
I
HEel
iii
I
-Turn the main switch to "ON" .
-Turn the "LIGHTS" (dimmer) switch to
" LO " or " HI " position.
-Check for voltage (12V) on the " Green "
and "Yellow" lead at bulb socket con -
nectors .
n
MEETS
'7
SPECIFICATION (12V)
I
This circuit is good.
I
2. Meter light does not come on .
1 . Bulb and bulb socket
- Check the bulb and bulb socket for continu -
ity.
Refer to the "CHECKING OF BULBS " sec-
tion .
~
CONTINUITY
2 .Voltage
-Connect the pocket tester (DC20V) to the
bulb socket coupler.
Tester (+) lead
--->
Blue
CD
terminal
Tester (-) lead
--->
Black
®
terminal
~
DI
B L
DC20vt4~
I~@~
'-----l
~ ~r
)
I
I
NOCONTINUITY
l
--------------~
I
Replace bulb and/ or bu_lb.:.......:.,so_c_k_e_t_. ______
---I
-Turn the main switch to " ON".
OUT OF SPECIFICATION
-Check for voltage (12V) on the "Blue" lead
at the bulb socket connector .
n
MEETS
~
SPECIFICATION (12V)
I
This circuit is good.
I
7-47
Wiring circuit from main switch to bulb
socket connector is faulty, repair.